Transmitter outline dimension and type
According to the size of the sensor, we offer four kinds of transmitter housing, As shown in the figure below, please note: the PCB board, software and menus and functions are be the same, only the size of housing and shape of the housing is different.
Integrated Magnetic Transmitter
Remoted Magnetic Transmitter
English ,With LCD,display flow rate , total flow , velocity etc three internal accumulator, record positive total flow and reverse total flow and net total 3.6V battery power emf type with backlight.
Nonlinear Correction Function:Multi segment linear correction,suitable to variety of sensors
Automatic Zero Calibration Function
Quick Response, Response time of 0.3 seconds
Electrode Self-Cleaning Function
Suitable to Size of the Sensor (mm):
1,2,3,6,8,10,15,20,25,32,40,50,65,80,100,125,150,200,250,300,350,400,450,500,600,650,700,800,900,1000,1100,1200,1300,1400,1500,1600,1700,1800,2000,2200,2400,2600,2800,3000
Power Supply
Power supply :85VAC --- 265VAC or or 110VAC to 420VAC or 24VDC or 3.6v lithium battery
Requirement For Sensor And Excitation (AC and DC power supply type)
Excitation current can be set to 125mA,160mA,250mA
250mA excitation current is suitable to the resistance of two coil: 35~ 65ohm
125mA excitation current is suitable to the resistance of two coil: 65 ~ 120ohm
excitation frequency:25HZ;12.5HZ,6.25HZ,3.125HZ
Communication
RS485 (standard),HART (option) MODBUS interface:RTU format,Physical interface:RS-485,Electrical isolation:1000V; HART interface:Support standard HART protocol
