TDS-100P portable ultrasonic flow meter/heat meter is suitable for any industry application of fluid flow/heat online calibration and measurement.good at easy operation,high accuracy,good consistency,online printing, longer battery powered time,heat measurement,and so on.
Accuracy: better than 1%
Repeatability:better than 0.2%
Battery:built-in ni-mh charged battery work for 24 hours continually
Sensors: clamp on type
Display: two lines displaying(instant flow,total flow,signal status)
Signal output: isolation RS485
Communication protocol:MODBUS protocol,FUJI extension protocol.
Printing output: built-in one body thermal printer.(optional choice:if not use printer,you can choose SD card data logger to store datas,and read them on the computer)
Heat measurement function;clamp on type platinum resistors(PT100) to measure heat quantity
Other function :self-diagnose ,indicate the working status is normal or not.
1:measurement accuracy: better than 1%
2:repeatability:better than 0.2%
4:measurement cycle:500ms(two times per second,collect 128 set datas per cycle)
5:battery: built-in Ni-MH,continually working up to 24 hours.
6:installation method: clamp-on installation.
7:display:2*20 backlit LCD(instant flow rate,totaliser flow rate,signal status,etc.)
8:signal output:isolation RS485
9:communication protocol:MODBUS protocol
10:print output:built-in thermal printer,achive to print online or at scheduled time.
11:other fuctions:self-diagnosis,indicate present working status is normal or not.
12: transducers:clamp-on type that can be connected or unconnected easily .