Categories

Exhibition

Installation tips of Electromagnetic flow meter
Feb 02, 2019

1. Avoid magnetic objective or strong magnetic equipment(such as large motors, large transformers, etc.)in case the magnetic field affecting the flow signal detected.

2.It should be installed in a dry and ventilated place. It should not be installed in a place with damp or water accumulation.

3.Sunlight and rain should be avoided as much as possible to avoid ambient temperature above 60 °C and relative humidity greater than 95%.

4.Choose a place that is easy to maintain and convenient for activities.

5.The flowmeter should be installed at the end of the pump and must never be installed on the suction side; the valve should be installed on the downstream side of the flow.


  • QR CODE
  • facebook