Categories

Exhibition

Ultrasonic Level Meter with GPS Tracking System
Dec 18, 2018

Description:

This ultrasonic fuel level detector uses the ultrasonic detection technology to measure the height of fuel level in container and output a standard electrical signal after through circuit processing. Ultrasonic sensors outer adheres on the bottom of the fuel tank and no need directly to contact with the fuel level that could be real-time detection the height of fuel level. It could be widely used in various types of vehicles for fuel measuring and monitoring, also could be combined with GPS/GPRS communication technology, through our multi output service to satisfy.

Features:

1) Measuring accuracy: The resolution of ultrasonic level meter ±0.5%. Ultrasonic sensor makes the temperature correction in -40 ºC to +80 ºC and make sure it could run under a high or low temperature working environment and receive accurate data.
2) Good stability :It uses the newest ultrasonic non-contact technology do not directly contact with level and could assurance its stability and long-life.
3) Easy installation:commonly directly install on the bottom of fuel tank and no need to rebuilt structure or change the fuel tank and could measure the fuel capacity directly may saving the cost of installation;
4) Simple application. When we designed this product before, we had taken into account to butt joint with all kinds of communication product data. When you choose it you could find it could be directly combined with the common GPS/GPRS transmission module thus to reduce the secondary development of users' and achieve to the correct and manage the height of liquid level;
5) With standardization data interface. There are analog voltage (1-5V) and current (4-20mA) output, digital output of 4-20mA and RS485;
6) Alarm output. It could be external horn and achieve alarm when the fuel level rapid declines or the wire was cut;

  • QR CODE
  • facebook