Surface Roughness Tester Measurement Stand
SRS-1 Measurement Stand, primarily for use with measuring instruments, according to the different shape and height of the workpiece, the instrument can not be measured directly to get accurate data, it needs to be mounted on the measurement stand, and than turn high, low to let the pointer in the zero scale, thus greatly to improve the accuracy of measurement.
Installation & Operation:
*Installation Procedure: Unloading the screws in adjustment bracket with a screwdriver, remove the adjustment bracket, mounted the instrument on the measurement stand (used two previously removed screws).
*Operation Procedure:Press the power button to boot, by adjusting the measuring bracket so that the sensor contact with the measured object, the stylus cursor position (refer to manual component description) should be instructed in "0' point(or upper and lower frame) position. After adjustment, the measurement can be taken in 2 seconds when the instruments is stable